Видео

Too much port noise. It was made to play 500 watts not 1500

These could also be used to hook up a subwoofer to a receiver lacking a sub out or high level inputs. You'd probably have to sacrifice the "B channel" on the receiver/integrated amplifier.

While I prefer and love dts. Their demos really suck. Dolby is far ahead when it comes to demos.

The music in the becoming almost made me leave. Good review

...if you pause this video at 2:34 mins. In the bottom righthand corrner... It literally says "zone 2, subwoofer, line out, PRE OUT" !!!

But you loose the power from the reciever? Wanting to bi amp. Reciever running the high end and external amplifier running the low end. Don't look possible with this device. Once you run your speaker wire out from your reciever? Or could you use the B channel for this device and still get sound out of the A channel. I have questions. Anybody got some out there?

The Magnetar UDP 9000 has the best audio section of any 4K player, and at $3000 you know why.

No joke wtf no music????😢

Great testing I always heard that the tube's were better!😂

Hope it aint that crappy adp piece of shit, tried it, sucked

People buy two amplifiers and become experts , giving their expertise as if they were designers with degrees in Electronics and electrical engineering!! and fools accepting their bla bla bla ....

I run the 100F’s / 90C / 40B’s supported by the Anthem AVM70 / MCA225 / MCA525 with the Perlisten D15S & D215S. Endgame for me.

Dolby atmos

I liked the solid state amps way better than the tube amp. I could clearly hear everything with the solid state amps. The Carver tube amp sounds muddy.

What the purple input on the amplifier

You could split out of the phones jack too

Which stereo

Good day. Can you tell us the name of the enclosure you bought for this adapter.

Does it matter what the ohms rating on the receiver is when you ad an amp like this

I have a FF 3 which I bought to match my Triton seven GoldenEar. It is my first surround system and I have enjoyed the system along with my NAD receiver.

How are these compared to GE Triton one R?

I've watched lord of the rings in DTS. And wow, what a difference

Dts x always best'

Shame you didn’t show it playing a CD. What does the display do does it show track and time. And can you use the front panel buttons to play and navigate a CD

Do you know of any receiver that you don't have to use an adapter

What's that adapter called

Ssd .. No sound Demo.

External amp, does that include a EQ?

Can anyone explain to me why you would hook a sub to a pre amp if the sub has a dedicated amplifier? Thank you.

Im surprised the Founder doesnt have outright superior sound quality.Yea of course it cant match your Tritons output, but I would expect superior sound quality.

Nothing helps if the led driver (leds power source) gives that. My DLP has a battery and even if there is no ac power source, hdmi etc connected it gives that stroboscopic effect (like some LCD screens have) in menu screen.

I remember getting a VHS from Sony with announcement of DVD and its benefits

what is center speakers?? As far as I have seen before, you were using golden ear center

Keep up the great job! 😎👍🏻

U couldnt just put the RCA cables in one of thosw inputs then turn the receiver to that?

How did you intall pre amp chip... You didn't show where you plugged it in...

Can you connect a Sony Bluetooth speaker with that turntable please help?

High-Velocity Folded Ribbon AMT Tweeter From the goldenear Homepage Both are amt’s And a AMT is not only a bullshit terrible sounding tweeter, it is almost exactly the opposite to a ribbon

Tekton never showed his measurements, only cried that Klippel is wrong. What a wussy.

My sound system consists of 6 SVS Ultra Bookshelf speakers (2 for the mains, 2 for the side channels, and 2 for the rears), an SVS Ultra Center speaker, 4 SVS Prime Elevation speakers ceiling mounted for Dolby Atmos and 2 SVS SB-3000 Subwoofers. The system is powered by a Parasound Halo A52+ 5 channel amplifier and a Yamaha Aventage RX-A8A 11 channel AVR with dual AC Infinity AIRCOM T9's keeping them cool, and all are connected to a Panamax M5400-PM Power Conditioner.

Does it have a level control?? Think that ur amp can push 80w and the line out converter is capable of delivering pure audio to the rca without over power music.. Then my receiver is delivering 150w and i am connecting that l.o.c for my receiver, then will my music overpowered to the rca and cause clipping or distortion. Please answer me.. becz all the car audio loc has a level control...

I use an 80f for my center in my 100f system

Can you use these adapters for a TV with audio out? Any channel of audio output with the correct adapters?Thanks.

I know this is an older video. Anyone interested can build one of these and make it less bulky. Take a short length of speaker wire. Connect the positive lead to one leg of a 1w 3.9k ohm resistor and another short wire from the other leg to the positive connection of a female RCA connector (solder or screw terminal style). Do the same for the negative lead except using a 1/2w 430 ohm resistor with the other leg going to the negative terminal of the same RCA connector. 2 resistors (1 per lead) of differing resistance. Solder the speaker wires to the resistors. Then, you can shrink tube the resistors and joints or wrap with electrical tape or tessa tape. Plug in your rca cable to the diy connector. Connect the exposed speaker lead to your speaker output of your receiver. No need for a bulky plate. You could make 5 or 7 of these for %10 or so combined. I had to pause the video to read the resistors and see how they are connected. Wire > resistor > rca connector. The parts are cheap on Amazon or other sites online. I hope this helps.

If your receiver has a headphone jack, you can use that as a pre-out. So, the cable you'd need, is a phono plug (headphone plug) to RCA. It's not "clean" looking but, it 100% works. You just need to remember to disable your selected speakers on the receiver.

sounds great now check the Edge of Tomorrow intro scene then you will return the pb-16ultra because of the annoying sound from the port many people have experienced this

I feel like they're a nightmare to repair, cost, size and weight-wise; sooner or later they'll need at least one repair on the foam surround or/and amps. Maybe two F113's are a smarter move. Or two Velodynes Digital Drives.

You're a lifesaver! My Denon only has subwoofer pre-outs so I really thought I didn't have any other options for hooking up an external amplifier until I saw this video! I pretty much ordered this immediately lol. Can you hear any sound differences using this adapter? Side note: check out Fosi v3 mono amplifier that just came out. It's around $100 and is putting high-end amps to shame, especially at its price!

It seems to me that the speaker wire being unshielded will introduce hum into the amplifier.

The video starts at 545